![](https://www.royalrooster.com.au/pub/media/wysiwyg/2_ways_to_order_rr-2.png)
- Measures 4.9m long, 1.6m wide and 1.9m high
- Made from strong, yet light-weight, aluminium frame
- Strong 2.5mm thick galvanised mesh with 25mm squares (smaller ‘mini mesh’ available)
- Made standard with all mesh walls and roof. Optional solid roof, walls and skirting available using mini corrugated iron in a choice of colours
- Takes 3+ hours to assemble, with detailed illustrated instructions provided
ALUMINIUM FRAME
Unlike steel or timber, rabbit enclosures made with aluminium frames will not rust, rot nor deteriorate in the weather. Your Royal Rooster rabbit enclosure will look just as great in many years’ time due to the durable materials that are used in its construction. Royal Rooster’s specially designed aluminium is made with u-shaped channels in which the mesh or mini-fluted iron slots in directly. This means that there are no ugly fixings on either side of the panels to keep the materials in place. No welds or sharp edges on the mesh to be concerned about.
Black Frame Optional Upgrade: The enclosures as standard are made with silver (clear anodised) aluminium framework, however black anodised frame is also available as an optional upgrade.
MESH OR IRON ROOF
The Bunny Pavilion with Medium Extension comes standard with a mesh roof made from 25mm x 25mm x 2.5mm mesh. Iron Roof Optional Upgrade: If you would prefer extra protection for our rabbits, you can choose to have an optional solid roof section on your Pavilion. This consists 2.5m of solid iron roof with the extension part of the Pavilion (1.2m) in mesh. This iron roof is available in a range of Colorbond Colours. Alternatively a full solid roof is also available.MESH OR IRON WALLS
The Bunny Pavilion with Medium Extension comes standard with all mesh walls enclosed with 25mm x 25mm x 2.5mm mesh. 3 Iron Walls Optional Upgrade: If you would like some extra protection for your rabbits, you can chose to have the back wall (1.6m wide) and a proportion of the long side walls (1.2m) enclosed with mini fluted iron in a choice of Colorbond colours.SKIRTING/ KICK-BOARDS
![](https://www.royalrooster.com.au/pub/media/wysiwyg/Colorbond_Upgrades_2023.png)
INSULATED ROOF AND WALLS
These Bunny Pavilions with Small Extension are also available with an insulated roof and/ or insulated walls. This is done by using 7mm silver backed insulation that is sandwiched between the mini fluted iron walls on the outside and aluminium composite panel on the side and underside of the enclosure.GALVANISED MESH
The sides of the Bunny Pavilion with Medium Extension are enclosed with galvanised steel mesh. As standard these rabbit enclosures are made with 25mm x 25mm mesh with wire thickness of 2.5mm. Galvanised Mini Mesh Optional Upgrade: If snakes are a concern where you live, then 12.5mm x 12.5mm squares and has wire thickness of 1.24mm may be needed.POWER COATED MESH
For those wanting a black finish to their mesh, your choice of mesh size and finish can also be powder coated in a black finish.WEATHER SHIELD
![](https://www.royalrooster.com.au/wp-content/uploads/2024/06/weather-shield-pavilion.png)
OPEN FLOOR DESIGN
These rabbit enclosures do not have a floor as standard. You may choose to put your enclosure on pavers or concrete or even incorporate into your garden beds with plants for added interest and shade for your rabbits. Anti-Dig Mesh Floor Optional Upgrade: Optional ‘anti-dig floors’ can also be purchased for those concerned about their rabbits burrowing their way out of their hutch or concerned about dogs and foxes digging their way in. These floors are sections of 50m x 50mm mesh (3mm wire thickness).ACCESS DOOR
The Bunny Pavilion style of enclosure has a large door at the front allowing easy entry into the enclosure. This door is 1.94m high.HOOK ON BOWLS
Royal Rooster has stainless steel hook on bowls available in two sizes: 280ml and 560ml.These hook straight on to the mesh of your enclosure for food or water. Royal Rooster also offer a Feeder Shelf that has a stainless steel bowl incorporated into the shelf. These can be positioned at any height in your rabbit enclosure.CAGE ANCHOR KITS
If you’re putting your enclosure on concrete, it’s a good idea to anchor down if strong winds are a concern in your location.DELIVERY INSURANCE
This covers the replacement or repair of your rabbit enclosure if damaged in transit with TNT as well as the freight to transport damaged parts back to us and new parts back over to you. Only $15 for peace of mind. Highly recommended.ASSEMBLY REQUIREMENTS
These cages are straightforward to put together and come with detailed, illustrated instructions. You’ll need a rubber mallet, an electric drill and a number 2 Philips-head driver. Assembly time should be 3+ hours depending on upgrades and skill level. If you order a cage with mini mesh walls, a pair of pointy nose pliers is also handy.LEAD TIME & FREIGHT
![](https://www.royalrooster.com.au/pub/media/wysiwyg/Australian_made2.png)
Not what you’re after? See the whole range of products on offer from Royal Rooster or contact us if you have further questions. We’d love to help!
Reviews
There are no reviews yet.