• Measures 2.5m long, 1.6m wide and 1.9m high
• Made from strong, yet light-weight, aluminium frame
• Strong 2.5mm thick galvanised mesh with 25mm squares (larger 50mm mesh also available)
• Made standard with all mesh walls and roof. Optional solid walls, roof and skirting available in mini corrugated iron in a choice of Colorbond colours.
• Takes 3+ hours to assemble, with detailed illustrated instructions provided

ALUMINIUM FRAME

Unlike steel or timber, dog enclosures made with aluminium frames will not rust, rot nor deteriorate in the weather. Your Royal Rooster dog enclosure will look just as great in many years’ time due to the durable materials that are used in its construction. Royal Rooster’s specially designed aluminium is made with u-shaped channels in which the mesh or mini-fluted iron slots in directly. This means that there are no ugly fixings on either side of the panels to keep the materials in place. No welds or sharp edges on the mesh to be concerned about.

Black Frame Optional Upgrade: The cages as standard are made with silver (clear anodised) aluminium framework, however black anodised frame is also available as an optional upgrade.

MESH OR IRON ROOF

The Dog Pavilion comes standard with a mesh roof made from 25mm x 25mm x 2.5mm mesh.

Iron Roof Optional Upgrade: If you would prefer a full solid roof, you can have your Dog Pavilion made with a solid iron roof (2.5m x 1.6m) in a range of Colorbond Colours.

MESH OR IRON WALLS

The Dog Pavilion comes standard with all mesh walls enclosed with 25mm x 25mm x 2.5mm mesh.

Large Mesh Optional Upgrade: The Dog Pavilions can also be made using 50mm x 50mm mesh that is 3mm thick. This is ideal for your larger, stronger dogs.

3 Iron Walls Optional Upgrade: If you would like some extra protection for your dogs, you can chose to have the back wall (1.6m wide) and half of the long side walls (1.2m) enclosed with mini fluted iron in a choice of Colorbond colours. This creates a sheltered area at the end of the dog run.

SKIRTING/ KICK-BOARDS

These dog enclosures can also have a 30cm skirting/ kick-board incorporated around the entire perimeter of the cage.

These colours include Woodland Grey, Pale Eucalypt, Deep Ocean and Monument.

INSULATED ROOF AND WALLS

These dog enclosures are also available with an insulated roof and/ or insulated walls. This is done by using 7mm silver backed insulation that is sandwiched between the mini fluted iron walls on the outside and aluminium composite panel on the side and underside of the enclosure.

POWER COATED MESH

For those wanting a black finish to their mesh, your choice of mesh size and finish can also be powder coated in a black finish.

WEATHER SHIELD

If you have chosen an iron roof and walls, you can have even more protection for your pets with a weather shield. This removable shield further encloses the housing area but leaves a gap for your pets to enter the housing end. Designed to be removable in the warmer months for maximum ventilation. Made with an aluminium extrusion frame and infilled with mini fluted iron to match the other colours chosen on your enclosure.

OPEN FLOOR DESIGN

These dog enclosures do not have a floor as standard. You may choose to put your enclosure on pavers or concrete or on a grassed area.

Anti-Dig Mesh Floor Optional Upgrade: Optional ‘anti-dig floors’ can also be purchased for those concerned about their dog digging their way out. These floors are sections of 50m x 50mm mesh (3mm wire thickness).

ACCESS DOOR

The Dog Pavilion style of enclosure has a large door at the front allowing easy entry into the enclosure. This door is 1.94m high.

HOOK ON BOWLS 

Royal Rooster has stainless steel hook on bowls available in two sizes: 280ml and 560ml. These hook straight on to the mesh of your enclosure for food or water.

CAGE ANCHOR KITS 

If you’re putting your enclosure on concrete, it’s a good idea to anchor down if strong winds are a concern in your location.

DELIVERY INSURANCE 

This covers the replacement or repair of your dog enclosure if damaged in transit with TNT as well as the freight to transport damaged parts back to us and new parts back over to you. Only $15 for peace of mind. Highly recommended.

ASSEMBLY REQUIREMENTS

These enclosures are straightforward to put together and come with detailed, illustrated instructions. You’ll need a rubber mallet, an electric drill and a number 2 Philips-head driver. Assembly time should be 3+ hours depending on skill level. If you order an enclosure with mini mesh walls, a pair of pointy nose pliers is also handy.

LEAD TIME & FREIGHT

All dog enclosures are made in our purpose built premises on Theen Ave, Willaston in South Australia. Lead times on orders can vary depending on the time of the year and other factors out of our control. Please click here to see that latest lead time on orders.

TNT generally takes between 1-2 weeks to deliver items once picked up from us. Picking up from a TNT depot rather than having your cage delivered to your home can save quite a lot in delivery costs. So that is also an option when you go to check out.

If you live in SA you’re most welcome to pick up your order from our premises at 43 Theen Ave Willaston.

Not what you’re after? See the whole range of products on offer from Royal Rooster or contact us if you have further questions. We’d love to help!