
- Suits many small birds such as finches, budgies or larger birds such as parrot or macaws
- Measures 3.5m long, 1.6m wide and 2.2m high (1.66m door height)
- Made from strong, yet light-weight, aluminium frame (silver, standard)
- Strong 2.5mm thick galvanised mesh with 25mm squares (smaller ‘mini mesh’ available for smaller breeds )
- Made standard with a partial solid peaked roof (2.3m iron, 1.2m mesh) and three solid walls made from mini fluted zincalume iron (Colorbond colours available for upgrade)
- Detailed illustrated instructions provided
ALUMINIUM FRAME
Unlike steel or timber, bird aviaries made with aluminium frames will not rust, rot nor deteriorate in the weather. Your Royal Rooster bird aviary will look just as great in many years’ time due to the durable materials that are used in its construction. Royal Rooster’s specially designed aluminium is made with u-shaped channels in which the mesh or mini-fluted iron slots in directly. This means that there are no ugly fixings on either side of the panels to keep the materials in place. No welds or sharp edges on the mesh to be concerned about.
Black Frame Optional Upgrade: The aviaries as standard are made with silver (clear anodised) aluminium framework, however black anodised frame is also available as an optional upgrade.
GALVANISED OR STAINLESS STEEL MESH
The sides of the Avian Palace with Small Extension are enclosed with galvanised steel mesh. As standard these bird aviaries are made with 25mm x 25mm mesh witha wire thickness of 2.5mm. This prevents large birds from escaping and the wire thickness of 2.5mm means it can’t be chewed through by most birds. Galvanised Mini Mesh Optional Upgrade: If you have smaller birds then ‘Mini Mesh’ which has 12.5mm x 12.5mm squares and has wire thickness of 1.24mm may be needed. This prevents smaller birds escaping and has thick enough wire that cannot be chewed through by smaller birds. Stainless Steel Optional Upgrade: For those wanting stainless steel mesh (Grade 304) this is available in either 25.4mm x 25.4mm x 2mm or 12.7mm x 12.7mm x 1.6mm.POWER COATED MESH
For those wanting a black finish to their mesh, your choice of mesh size and finish can also be powder coated in a black finish.MINI CORRUGATED IRON

SKIRTING/ KICKBOARD

INSULATED ROOF OR WALLS
These aviaries are also available with an insulated roof and/ or insulated walls. This is done by using 7mm silver backed insulation that is sandwiched between the mini fluted iron walls on the outside and aluminium composite panel on the side and underside of the aviary.IRON & MESH ROOF
The first part of the roof of the Aviary Palace with Small Extension (2.3m long) is made of mini corrugated iron, providing shade from the sun and shelter from rain in the wet months. The two extension sections of the aviary are made from mesh to allow extra sunlight to shine through in this section of the aviary. A full solid roof is also available. Weather Shield Optional Upgrade:
OPEN FLOOR DESIGN
These aviaries do not have a floor as standard. You may choose to put your aviary on a concrete slab to keep out rodents and to have a nice near floor in your aviary. If this is not an option and you are concerned with rodents, then a mini mesh floor may be required. Mini Mesh Floor Optional Upgrade: If you plan to put sand, gravel or bark chips on the ground in your aviary, you may wish to put a mini mesh floor down first to prevent mice from digging their way under. Galvanised mini mesh or stainless steel mini mesh floors are both available.ACCESS DOOR

STAINLESS STEEL PERCH HOLDERS
Stainless steel perch holders are available for fixing to the mesh walls of your aviary. These suits tree branches 0.5cm – 4cm in diameter. Perches not included.AVIARY ACCESS FEEDERS & CLIP ON BOWLS

BIRD SHELVES
Add extra interest and landing locations for your birds with a range of shelves that come in three styles. The Timber Style Shelves are made with an aluminium frame and inset with ‘mod-wood’ timber composite lengths. The Standard Shelves are made with an aluminium frame and inset with aluminium composite panel. The Feeders Shelves are made with an aluminium frame and inset with aluminium composite panel with a special cut out for a 300ml stainless steel bowl. These can be installed either in the housing or extension area of your aviary.ANCHOR KITS
It’s important to secure your cage to the ground to prevent strong winds from lifting and damaging your cage. You can order anchor kits to suit concrete sleepers or slabs, treated pine sleepers or for securing directly into the soil. The concrete and timber anchor kits consist of thick angle brackets, bolts and screws to secure your cage along the ground cross bars of the cage. The soil kit consists of 450mm hardened steel star droppers/ pickets which are driven into the ground and then secured to the ground cross bars of the cage using bolts, washers and nuts. Note that the soil anchor kit may not be suitable if your ground is very rocky or sandy. Additional anchoring may be required in extreme weather, so please assess your situation accordingly.DELIVERY INSURANCE
This covers the replacement or repair of your aviary if damaged in transit with TNT as well as the freight to transport damaged parts back to us and new parts back over to you. Only $15 for peace of mind. Highly recommended.ASSEMBLY REQUIREMENTS
These aviaries are straightforward to put together and come with detailed, illustrated instructions. You’ll need a rubber mallet, an electric drill and a number 2 Philips-head driver. If you order a aviary with mini mesh walls, a pair of pointy nose pliers is also handy.LEAD TIME & FREIGHT

Not what you’re after? See the whole range of products on offer from Royal Rooster or contact us if you have further questions. We’d love to help!
2 reviews for Avian Palace with Small Extension